Technical specifications of hydraulic jack 100° opening 180°opening
Rotation maximum angle 118° 200°

Effective torque 272 Nm (750 SBS) 543 Nm (750 CBAC-SB)

Angular velocity 5,2°/s (750 SBS) - 7,8°/s (750 CBAC-SB)

Protection class IP 67

Technical specifications of hydraulic pump unit 750 CBAC 750 SB 750 SBS
Power supply 230 V~ (+6% -10%) 50 (60) Hz

Absorbed power 220W

Absorbed current 1 A

Motor rotation speed 1400 rpm 960 rpm

Pump flow rate 0,75 l/min 0,5 l/min

Operating ambient temperature -20°C +55°C

Protection class IP 55

Thermal protection on motor winding 120°C

Weight 7 kg

Type of oil FAAC OIL XD 220


Dimensions




Electronic control equipment

Model Specifications
410 MPS vedi riferimento

450 MPS vedi riferimento

460 P vedi riferimento


N.B.: Timed electronic deceleration is possible by using the 460 P equip-ment. By combining the device with GATECODER, in addition to electronic deceleration, the electronic obstacle detection function is also available.


SPECIFICATIONS
Hydraulic pump unit • Models with hydraulic locking at opening and closing and without hydraulic locking • Models with max leaf length up to 3.5 m • Max use frequency 45 cycles/hour • Electric motor power supply 230 V (+6% -10%) - 50(60) Hz • Electric motor power 220 W • Thermal protection at 120°C built into motor winding • Operating ambient temperature -20°C +55°C • Lever operated built-in release device • Single-phase motor with two rotation directions • Hydraulic gerotor pump (max low noise) • Pump flow rate 0.5 l/m and 0.75 l/m • Die-cast distribution flange • Separate control of opening and closing force by by-pass valves with tamper-proof plate • Anti-crushing safety to UNI 8612 standard • Tank in anodised aluminium • Air breather screw • Oil filling plug with level stick • Mineral hydraulic oil with additives
Enclosure for hydraulic pump unit (optional)• ABS enclosure • Protection class IP55 • Wall- or flush-mounting • Designed for securing to DIN guide • Designed for installation of door locking switch • Fuse-holder • Seats for capacitor supports • Removable hinges for right or left opening • Lock with triangular or customized key (optional) • Dimensions (lxhxd): 246 x 353 x 142 mm
Hydraulic jack • Hydraulic jack with rack piston and transmission shaft • Leaf max weight 800 Kg • Max torque 543 Nm (with hydraulic units with pump capacity of 0.75 l/m)/5.2°/s (with hydraulic units with pump capacity of 0.5 l/m) • Angular velocity 7.8°/s (with hydraulic units with pump capacity of 0.75 l/m)/7.8” Nm (with hydraulic units with pump capacity of 0.5 l/m) • Models with rotation maximum angle 118° and 200° • Body in extruded aluminium • NIPLOY treated jack liner • NIPLOY-treated transmission shaft • Height adjustment dowels • Protection class IP67