Technical specifications of 844 ER Z16 CR CAT RF

Power supply 230 V~ (+6% -10%) 50 (60) Hz

Absorbed power 650W

Absorbed current 3,5 A

Traction and thrust force 0÷110 daN (Z16)

Motor rotation speed 1.400 rpm

Reduction ratio 1:30

Operating ambient temperature 20°C +55°C

Weight with oil 14,5 kg

Protection class IP 44

Type of oil FAAC OIL XD 220

Gate speed 9,5 m/min (Z16)

Thermal protection on motor winding 120°C

Electric motor Single-phase, bi-directional

Limit-switch Inductive

Clutch Twin-disk in oil-bath




Dimension

Specifications 780 D
control board
(included into 844
ER Z16 model) 578 D
control board
for far
applications)
Transformer Separato (connessione a faston
sul circuito stampato) Integrato

Power supply 230 Vac (+6%-10%) 50 Hz

Absorbed power 10 W

Motor max. load 1000 W

Accessories max. load 0,5 A

Operating ambient
temperature -20°C +55°C

Fuses 2

Function logics Automatic/"Stepped” automatic/
Semi-automatic/"Stepped”
semiautomatic/Safety/Semiautomatic
B/Dead-man C

Work time Programmable (from 0 to 4 min)

Pause time Programmable (from 0 to 4 min)

Thrust force Adjustable over 50 levels

Terminal board inputs Open - Partially Open
Opening safety devices
- Closing safety
devices – Stop – Edge
Power supply Open - Partially Open
Opening safety devices
- Closing safety
devices – Stop – Edge
- Power supply + earth
- Opening and closing
travel limit/Encoder

On-connector inputs Opening and closing
travel-limit/Encoder /

Terminal board outputs Flashing lamp/Motor/ 24Vdc power
supply to accessories/ 24Vdc
indicator-light-Op./cl. Electric lock

Rapid connector Plug-in receiver – Decoding card

Programming Nr. 3 keys(+,-,F) and display,
“basic” or “advanced” mode

"Basic" mode
programmable functions Function logic – Pause time –
Thrust force – Gate direction

"Advanced" mode
programmable functions Thrust torque – Braking – Fail safe
– Pre-flashing – Indicator-light/Timed
output/ Op./cl. Electric lock – Opening and
closing safety devices logic – Encoder –
Pre and post limit switch activation slowdown
– Partial opening – Time out – Cycle counter
for maintenance request

Status indication display

Plastic enclosures
compatibility None E – L -LM Mod.


844 ER Z16 SPECIFICATIONS

Non-reversing screw gearmotor • Gate maximum weight 1.800 Kg • Gate speed 9,5 m/min • Use frequency max. 30% • Max thrust 110
daN • Electric motor power supply 230 V (+6% -10%) -50 (60) Hz • Electric motor power 650 W • Thermal protection at 130° C built into
motor winding • Operating ambient temperature -20°C +55°C • Protection class IP 44 • Lever operated release device with coded key •
Single-phase, bi-directional motor (1,400 rpm) • Pinion gear Z16/module 4 • Inductive limit-switch • Lower and upper half-body in
pressure cast aluminium with cataphoresis treatment • Twin-disk clutch in oil-bath • Opening/closing force adjustable by hexagonal key
• galvanised foundation plate with side and height adjustment (optional) • Dimensions (LxWxH) 275x191x187 • Built-in 780D control
board • ABS control board enclosure with triangular key

780D CONTROL BOARD
Transformer: faston connection to the PCB • Power supply: 230 Vac (+6%-10%) 50 Hz • Absorbed power: 10 W • Motor max. load: 1000
W • Accessories max. load: 0,5 A • Operating ambient temperature: -20°C +55°C • Fuses: 2 • Function logics: Automatic/"Stepped”
automatic/Semi-automatic/"Stepped” semi-automatic/Safety/Semi-automatic B/Dead-man C • Work time: Programmable (from 0 to 4
min) • Pause time: Programmable (from 0 to 4 min) • Thrust force: Adjustable over 50 levels • Terminal board inputs: Open - Partially
Open - Opening safety devices - Closing safety devices – Stop – Edge - Power supply • On-connector inputs: Opening and closing
travel-limit/Encoder • Terminal board outputs: Flashing lamp/Motor/ 24Vdc power supply to accessories/ 24Vdc indicator-light-Op./cl.
Electric lock • Rapid connector: Plug-in receiver – Decoding card • Programming: Nr. 3 keys(+,-,F) and display, “basic” or “advanced” mode
• "Basic" mode programmable functions: Function logic – Pause time – Thrust force – Gate direction • "Advanced" mode programmable
functions: Thrust torque – Braking – Fail safe – Pre-flashing – Indicator-light/Timed output/ Op./cl. Electric lock – Opening and closing
safety devices logic – Encoder – Pre and post limit switch activation slowdown – Partial opening – Time out – Cycle counter for
maintenance request • Status indication: Display • Plastic enclosures compatibility: none
Note: 844 ER CR, 844 ER CAT, 844 ER RF mod.: without control board, for 578 D remote application into E-L-LM plastic enclosure.