Technical specifications 422 CBC 422 CBAC 422SB 422 PED. CBC 422 PED. SB
Power supply 230 V~ (+6% -10%) 50 (60) Hz

Absorbed power 220W

Absorbed current 1 A

Motor rotation speed 1400 rpm

Rod extension speed 1 cm/s 2 cm/s


Pump flow rate 0,75 l/min 1,5 l/min


Traction and thrust force 0÷690 daN 0÷380 daN


Operating ambient temperature -20°C +55°C

Thermal protection on motor winding 120°C

Weight 7 kg

Type of oil FAAC OIL XD 220

Protection class IP 55

Dimensions

SPECIFICATIONS
Hydraulic actuator with piston for swing-leaf gates • Models available with hydraulic locking in closed position, open and closed position, and without any locking • Models suitable for max leaf length up to 3.0 m • Max use frequency 55 cycles/hour • Pillar installation • Leaf opening inwards or outwards • Max opening angle 110° • Max traction/thrust force of 690 daN • Rod speed 1 cm/s • Rod effective stroke 240 mm • Electric motor power supply 230 V (+6% -10%) - 50(60) Hz • Electric motor power 220 W • Thermal protection at 120° built into motor winding • Overall dimensions (Length x Width x Height) 987x90x85 mm • Protection class IP55 • Operating ambient temperature -20°C +55°C • Built-in release device with customised key • Single-phase motor with two rotation directions (1.400 rpm) • Hydraulic gerotor pump (max low noise) • Pressure die-cast distribution flange • Separate control of opening and closing force by by-pass valves with tamper-proof plate • Rod in stainless steel • Fastening to front fitting by ball joint • Tank and piston protective housing in anodised aluminium • Air breather screw • Mineral hydraulic oil with additives • Models for pedestrian gates • Leaf length from 0.8 to 1.2 m • Use frequency of 70 cycles/hour • Max traction/thrust force of 380 daN • Rod extension speed 2 cm/s • Pump flow rate 1.5 l/min • Rod effective stroke 160 mm