Technical specifications 402 CBC 402 SBS

Power supply 230 V~ (+6% -10%) 50 (60) Hz

Absorbed power 220W

Absorbed current 1 A

Motor rotation speed 1400 rpm

Rod extension speed 1,3 cm/s 1 cm/s

Pump flow rate 1 l/min 0,75 l/min

Traction and thrust force 0÷500 daN 0÷690 daN

Operating ambient temperature -20°C +55°C

Thermal protection on motor winding 120°C

Weight 6,5 kg

Type of oil FAAC OIL XD 220

Protection class IP 55

Dimensions

Technical specifications
For the electronic equipment refer to the specific section.
N.B.: Timed electronic deceleration is possible by using the 460 P equip-
ment. By combining the device with GATECODER, in addition to electronic
deceleration, the electronic obstacle detection function is also available.
SPECIFICATIONS
Hydraulic operator with piston for swing-leaf gates • Models with hydraulic locking and without hydraulic locking • Models suitable for max. leaf length up to 3.0 m • Max use frequency 55 cycles/hour • Pillar installation • Leaf opening inwards or outwards • Max opening angle 110° • Models with max traction/thrust force 690 daN • Models with max rod speed 1.3 cm/s • Rod effective stroke 240 mm • Electric motor power supply 230 V (+6% -10%) - 50 (60) Hz • Electric motor power 220 W • Thermal protection at 120° built into motor winding • Overall dimensions (Length x Width x Height) 959x90x85 mm • Protection class IP55 • Operating ambient temperature -20°C +55°C • Built-in release device with triangular key • Single-phase motor with two rotation directions (1.400 rpm) • Hydraulic gerotor pump (max low noise) • Die-cast distribution flange • Separate control of opening and closing force by by-pass valves with tamper-proof plate • Anti-crushing safety to UNI 8612 standards • Rod in stainless steel • Tank and piston protective housing in anodised aluminium • Mineral hydraulic oil with additives