Technical specifications 748 COMPACT
Power supply 230 V~ (+6% -10%) 50 (60) Hz

Electric motor Single-phase, bi-directional

Absorbed power 350W

Absorbed current 1,6 A

Traction and thrust force 40 daN

Motor rotation speed 1400 rpm

Thermal protection on motor winding 140°C

Reduction ratio 1:25

Operating ambient temperature -20°C +55°C

Weight 10 kg

Gate speed 12 m/min (Z20)

Protection class IP 44

Dimensions


Specifications of 748 MP control board
Power supply 230 V~ (+6% -10%) 50 (60) Hz

Absorbed power 10W

Motor maximum load 350W

Accessorieses output 24 Vdc 500 mA max

Operating ambient temperature -20°C +55°C

Three protection fuses
3,15 A electric motor -
0,5 A Accessorieses - 0,25 A logic

• Programmable functions
- Four function logics A/E/S/AP
- Torque control trimmer
- Pause time control trimmer
- Trimmer for time-out adjustment
• Inputs signalling LED, limit-switch and alarm
• Terminal board outputs
- Flashing Lamp - motor - power supply for Accessorieses
• Terminal board inputs
- Open, partial opening, stop, safety devices, limit-switch, obstacle
detection electronic sensor
• Rapid connector for decoding cards or card receivers
• Malfunctions self-resetting alarm signal

SPECIFICATIONS
Non-reversing screw gearmotor • Gate max weight 300 Kg • Gate max length 10 m • Gate speed 12 m/min • Max. use frequency 25% • Max thrust 40 daN (Z16) • Electric motor power supply 230 V (+6% -10%) - 50 (60) Hz • Electric motor power 350 W • Thermal protection at 140°C built into motor winding • Operating ambient temperature -20°C +55°C • Protection class IP44 • Lever operated release device with coded key • Single-phase bi-directional motor (1,400 rpm) • Pinion Z 16/module 4 • Reduction ratio 1:25 • Limit-microswitch • ABS protective housing • Galvanised foundation plate • Dimensions (L x W x H) 210 x 260 x 245 (mm) • Built-in control board • 24 Vdc - 500 mA max output for Accessorieses • Microprocessor control • 3 protection fuses (motor-Accessorieses-logic) • Connector for card receiver/decoding cards • Separate high and low voltage terminal boards • Inputs status signalling LEDs • Programming Dip Switches • Automatic (A-AP-S) and semi-automatic (E) function logics • Two logics for safety devices (Dip Switches) • Max operating time control trimmer (7 to 70 s) • Thrust power control trimmer (0 to 40daN) • Pause time control trimmer 0 to 200 s • Inputs: closing safety devices, stop push-button, total opening push-button, partial opening push-button, obstacle detection electronic sensor (optional) and limit-switch • Outputs: power supply for Accessorieses, motor, flashing lamp.